{"product_id":"tover-idrofondo-h20-wood-floor-primer","title":"Tover Idrofondo H20 Wood Floor Primer","description":"\u003cp\u003eProfessional Wood Priming With The New Tover Idrofondo H20 Wood Floor Primer Deep penetrating water based wood floor sealer from Tover It will maintain the natural look of the wood without glazing it It will seal all pores and it will create a perfect base for sealers 100% fume free, very fast drying, water based, non yellowing Suitable for sealing commercial and residential wood floors To be applied over a new or newly sanded wood floor \/ surface It can be overcoated with any water based floor lacquer\/varnish It reduces lacquer absorption \u0026amp; it creates smoother finishes 1 L of Tover Idrofondo H20 Wood Floor Primer covers 12 sq m Highly appreciated by the professional floor sanding industry Tover Idrofondo H20 Wood Floor Primer I Why use Most water based floor lacquers are way more expensive than the primers. By sealing the wood floor with a primer you will reduce the amount of lacquer needed to fully seal the floor while creating a smoother finish. The primer will penetrate the wood fast, it will seal all the pores and it will create a perfect base for further coatings. Tover Idrofondo H20 Wood Floor Primer I Where to use The new Tover Idrofondo H20 Wood Floor Primer is a water based floor primer compatible with all wooden floors, wooden furniture, wooden frames, wooden doors, etc. It can be used on all types of wood that are dry, sealant free and clean. Usually 1 coat of primer is more than enough but in some cases where the wood seal is very rough or very absorbent, 2 coats can be applied. This water based floor primer is 100% clear and it will not affect the original look of the wood. Use the new Tover Idrofondo H20 Wood Floor Primer for residential \u0026amp; commercial floor refinishing projects. The product is only suitable for indoor use. Tover Idrofondo H20 Wood Floor Primer I How to use You need to assess the wood surface. If the surface is sealed with some type of lacquer or oil, you will need to sand it and expose the wood. The primer has to penetrate the wood in full. Sand the floor well until all pre-existing finishes are fully removed. Finish the floor with 100 grit sandpaper before applying the primer. Using a small varnishing brush apply 1 thin coat of floor primer all around the edges and areas where a varnishing roller cannot fit. For the larger areas use a professional varnishing roller. Apply enough wood primer to create a wet surface without over soaking the wood. Allow about 2-3 hours to dry and then re-sand the whole floor with 150 grit sandpaper. By doing so, you remove all rough surfaces and excess primer. Vacuum the floor one more time and now you are ready for varnishing \/ lacquering. You can use any single pack or two pack floor lacquer from Tover, Carver or Bona. Apply at least 2 coats of lacquer. The new Tover Idrofondo H20 Wood Floor Primer is a great quality wood floor primer that will help you achieve great results and it will save you money. The product is ready to use and it does not require dilution. It is essential to respect the sanding process step by step. Sand the surface with 40 grit sandpaper, then move to 60 grit sandpaper, then move to 80 grit sandpaper \u0026amp; then move to 100 grit sandpaper. Also, make sure to sand the primer after it has dried. Do not worry about removing some of the primer. The primer has penetrated the wood and it has sealed all the pores. You will only remove excess product and the rough patches. Tover Idrofondo H20 Wood Floor Primer\u003c\/p\u003e","brand":"Tover","offers":[{"title":"Default Title","offer_id":47351441227964,"sku":"tover1111","price":140.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/8008\/6972\/files\/Tover_parquet_finiture_acqua_fondi_stucchi_idrofondo_h20.jpg?v=1788032630","url":"https:\/\/palcle.com\/products\/tover-idrofondo-h20-wood-floor-primer","provider":"PRO-MAX US","version":"1.0","type":"link"}