Description
Deep Clean Porcelain And Granite Floors With The New Faber 30 Heavy Duty Stripper And Degreaser The most advanced heavy duty cleaning detergent from the entire Faber range It can be safely used to deep clean and restore porcelain and all ceramic floors A highly concentrated product that provides instant results on most tiled surfaces A low foam formula that can be used in conjunction with any low speed floor buffer It fully emulsifies grease, ingrained dirt, it removes old sealers and most protectors Suitable for intense floor cleaning projects and major floor restoration jobs To be used for indoor and outdoor floor cleaning projects I Slightly deodorised A very versatile type of of heavy duty cleaner that can be used on most floors To be diluted 1 to 1 for extreme cases and 1 to 4 for heavy duty floor cleaning It provides instant results and it requires minimal agitation to break down residue It can be used in conjunction with a mopping system or with a mechanical system The product will also remove moss and algae residue from all types of patio floors Due to its efficiency and its dilution rate, Faber 30 is highly cost effective Why Use It? The incredible Faber 30 is a heavy duty alkaline floor cleaner and floor stripper that can be used to deep clean and restore most types of outdoor floors and most types of indoor artificial tile floors. It is a highly versatile product that reduces the amount of scrubbing required to fully remove layers of dirt and old sealers. The product is highly alkaline, highly concentrated and suitable for intense heavy duty cleaning projects. By using the incredible Faber 30 Heavy Duty Stripper And Degreaser, the contractor will work faster and achieve better results at a cheaper rate. Porcelain Floors I Ceramic Floors I Concrete Floors I Painted Floors I Patios I Unsealed Natural Stone Floors Where To Use It The incredible Faber 30 Heavy Duty Stripper And Degreaser is a very versatile alkaline floor cleaner that can be used on many types of surfaces. This product is mainly used as a porcelain floor cleaner, ceramic floor cleaner, concrete floor cleaner, unsealed patios floor cleaner and as a heavy duty degreaser. It can be successfully used to deep clean and restore most indoor and outdoor surfaces that are unsealed or where the sealer has to be fully removed. How To Use It The epic Faber 30 Heavy Duty Stripper And Degreaser is a highly concentrated heavy duty floor cleaner that can be used diluted or undiluted. The level of dilution will vary from surface to surface and it also depends on the type of cleaning project. A dilution of 1 to 1 is only applicable when the floor cleaning contractor is actually looking to remove ingrained dirt and to remove old sealers and old protectors. The same dilution rate is also recommended when dealing with very dirty patios and commercial floors. A dilution of 1 to 4 or higher is usually suitable for most porcelain, ceramic and granite floors that are dirty but not in a very bad shape. The new formula Faber 30 Heavy Duty Stripper And Degreaser will react with the dirt instantly and it will start the process of emulsifying the dirt on contact. Step 1 Assess the condition of the surface. If the floor was sealed before or if the floor is still sealed, you need to be aware that the new Faber 30 Heavy Duty Stripper And Degreaser might fully or partially remove the sealer. Based on the initial assessment, a dilution rate and a cleaning strategy can be decided. Step 2 The product can be diluted in a mop bucket or inside the solution tank. Apply the product to the area and allow direct contact for at least 2-3 minutes before proceeding to the next steps. Within this period of time, the incredible Faber 30 Heavy Duty Stripper And Degreaser will get a chance to react with the dirt and soften up the dirt. Step 3 All surfaces will require agitation before the waste is extracted. If the user is dealing with smooth surfaces, a white pad or a blue pad can be used to deep clean the surface. If the user is dealing with uneven surfaces or deep grout lines, the user should be using a medium stiff buffer brush or scrubbing brush. If the user is attempting to strip off pre-existing sealers, a black floor pad or a green floor pad should be used. Use a low speed floor buffer to avoid splashing the product all over the walls. Step 4 Extract the waste with a wet vac. Make sure to extract it all and then wash the floor a number of times with a Kentucky mop or a flat mop to remove all the residue before proceeding to the next steps within the polishing process. Some surfaces might require an additional cleaning process before noticeable results are achieved. Our Recommendations You are just about to use one of the most effective alkaline cleaners. Make sure to respect the dilution rate. Make sure to assess the condition of your floor and only after you are 100% sure that the new Faber 30 Heavy Duty Stripper And Degreaser is the
