Description
Remove Grout Residue And Deep Clean Floor Tiles With Faber Tile Cleaner Gel 1L The ideal tile cleaner for vertical surfaces and all water washable surfaces It attaches to the surface and starts breaking the dirt apart within seconds Slightly acidic, water based, highly concentrated and very cost effective It can be used on all types of polished tiles, unpolished tiles and worktops Capable of removing ingrained dirt from inside natural stones with porosity It restores the original appearance of the tile without affecting the base material It can be used diluted for day to day cleaning or undiluted for deep cleaning It will remove residue and patina left by unsuitable tile cleaning products Suitable for residential cleaning and also for commercial cleaning projects The product cannot be used on materials that are highly acid sensitive Faber Tile Cleaner Gel 1L | Why Use It Cleaning very dirty vertical surfaces is not that easy if the cleaning product does not get a chance to react with the stain and it leaks down fast. This issue was resolved by Faber by creating a slightly acidic tile cleaning gel that attaches to the vertical surface which gives it a chance to break the dirt apart. The new Faber Tile Cleaner Gel is also perfect for removing deep impregnated stains, old patinas and all types of old residue left by unsuitable tile cleaning products. The new Faber Tile Cleaner Gel is highly concentrated, active and also very cost effective. Compatible with all natural and artificial tiles besides acid sensitive tiles. Faber Tile Cleaner Gel 1L | Where To Use The ideal product for deep cleaning bathrooms, showers, washrooms, kitchen splash areas, all types of worktops and tile surfaces. The product can be used for indoor and outdoor cleaning projects. If there are visible discolorations on the tile surface and the grout lines, then you can use the new Faber Tile Cleaner Gel to restore it. This product penetrates the surface deep and helps extract even stains that look hopeless. The product can also be used for day to day bathroom and tile cleaning projects. Faber Tile Cleaner Gel 1L | How To Use Depending on the type of project that you plan to undertake, you have a number of ways available to apply the product. If you are deep cleaning very dirty bathroom wall tiles for washrooms, then you should use the product undiluted. Apply the product to the affected area and allow up to 20 minutes of direct contact. Scrub well with a grout brush or a semi hard scrubbing pad and remove the excess. You can also dilute the product 1 to 5 or less and use it with a spray bottle. A number of cleaning operations might be required to be able to remove deep impregnated stains. You can also use the product with a mopping system when dealing with badly affected tile floors. Faber Tile Cleaner Gel 1L | Safety This product contains a pleasant fragrance, which could be misleading as to its strength, it is not as gentle as it smells. Be sure to wear a good pair of gloves, eye protection and waterproof shoes. The active chemicals that break the dirt so easily will also damage your skin very easily. Do not mix the product with any other cleaning products. Remember, you will only need to use this product if you are dealing with vertical surfaces. For floors and other tiled areas Faber has even better products available. This product was designed to deal with tough deep impregnated stains on vertical surfaces and worktops. Pre-testing for compatibility is highly recommended to avoid permanent damages. Faber Tile Cleaner Gel 1L
