Description
Create Slip Safe Surfaces With The Magic Faber YS ONE | Anti Slip Treatment For Porcelain And Granite Tiles water based non slip treatment for ceramic, porcelain & quart stones it will increase surface grip on floors without altering the colour/look suitable to use on domestic floors and high traffic commercial floors the product will create micro erosions that are invisible to the naked eye easy to apply, no more maintenance required after one quick application Faber YS One Non Slip can be used without any professional training it will cover between 30 to 50 square meters per Litre but it can vary Faber YS One | Safety Information Designed for professional use. Always follow the manufacturer's instructions and safety guidelines. Suitable personal protection equipment should be used. Store safely out of reach of children. Increase Surface Grip With The Faber YS One While installations like ceramic tiles and porcelain stoneware are attractive and durable, they can be really hazardous when they are wet. Slip and fall accidents can have varying effects. It’s not just the embarrassing falls to worry about in the middle of the workplace as you were dashing to make that presentation. There can be real injuries to the body. Bruises, sprains and fractures, back and even head injuries depending on how one lands on the floor. Falls are actually amongst the leading causes of workplace injuries. The shiny and slippery surfaces, food spills and messes that make them more risky, accidents when the cleaning is being carried out- you don’t want the customers or employees in your business premises tearing tendons and ligaments. Even at home, these accidents are common. With high-risk groups in the residence- like the kids and the elderly, the severity of the falls is more dire. You don’t want your loved ones to wind up in the hospital. From the bathrooms where wet conditions are the norm, to the kitchen where spills frequently occur, treating the surfaces to increase their non-slip attributes is key. However, you don’t want to sacrifice their beauty or structural integrity in the process. You want a formulation that will enhance the grip without corroding or etching the surfaces. That's where Faber YS One comes in. Walk boldly The water-based Faber YS One brings superior grip to the floors being treated. It acts chemically on the surface, to form tiny micro erosions. They will be invisible to the naked eye, but nonetheless highly effective in enhancing run-off of water, such that the non-slip attributes are retained even in wet conditions, whether one has shoes on, or is barefoot. This formulation is particularly beneficial with surfaces like ceramic tiles, plus polished, textured and natural porcelain stoneware, siliceous stone plus quartz, that get really slippery. It's safe to use on these surfaces, getting the task done without risking the structural integrity of the material, or affecting aspects like its colouration. It sets a long-lasting effect, and doesn’t even require regular maintenance to retain the non-slip attributes. When you turn to Faber products, you are joining consumers across the world- from the heart of Europe to out in the Gulf nations, all through to Russia, Japan, and other Asian markets who have placed their trust in the brand. It’s with good reason. You don’t get to survive and thrive in such a competitive industry for over 3 decades unless you’re actually good at what you do- and Faber walks the talk. The products provided cater to the various aspects of surface care, from protection after installation, routine cleaning and maintenance, to repairing damaged installations. The Faber YS One maintains the high standards of quality, allowing you to treat the surfaces in your establishment effectively. How To Use The Faber YS One Begin by preparing the surface. First, ensure that all dirt and grime has been cleaned off. You don’t want to trap these substances under the treatment. Allow the surface to dry. In fact, you should never apply the product on wet floors. In case there are pre-existing treatments on the surface, like wax, polymers and resins that had been applied, first remove them. For optimal usage, the Faber YS One should be in direct contact with the floor. In case you’re dealing with a recently laid surface, or one that has just been grouted, let the adhesive or grout used to first cure completely before you apply the Faber YS One. Next is determining the dwelling time that will be used. Here, it depends on the material, its resistance, composition and the surface hardness. The goal is to get the optimal dwelling time that will ensure satisfactory results with the non-slip attributes, while retaining the original appearance of the surface being treated. As such, it's advisable to carry out a spot test on a section of the floor which is in an inconspicuous area. Remember to rinse the surface, which will give you a correct idea without any residue coming in the way. When you press
